Identification of A119 (V1) or A119 V2

kevster

Member
Joined
May 7, 2015
Messages
89
Reaction score
7
Country
United Kingdom
Hi.

After a bit of advice please. How to identify if I have an A119 (V1) or a A119 V2 as well as visually from the outside?

I have recently returned one of my A119s (Original V1) for a replacement due to a fault.

I was told they don't have the new A119 V2 but they will send a A119 (V1) as was but it now comes with the foam pads.

Ok so it arrives....

Looks like a V2 to me, it has the new GPS mount contacts and the rear of the camera has the new contacts to suit the new GPS.

I thought this was only on the A119 V2.

So I am not unhappy if i have a V2 but the seller (Spytec) said check the camera version on the menu, which i cant find?

But from the firmware has stated it is a V1. Barcode on the boxes and pictures are identical.

So has the new pins/terminals now been updated on the V1 or do I have a V2.

Details

My other A119 V1
S/N: A119ST1*******
Firmware ST1_A119_161216_V2.01

The A119 V2? in question
S/N: A119ST2********
Firmware ST1_A119_170505_V2.04

Thanks
 
If it's a V2, it should have a V2 in the serial number on the back of the camera (A119V2xxxxxx).
 
If it has the new GPS mount and foam, it is the new version.
 
Back
Top