ITB-100HD (firmware) problem

Joop

New Member
Joined
Mar 9, 2013
Messages
1
Reaction score
0
Location
Belgium
A couple of monhts ago I bought an Itronics ITB-100HD dashcam.
The camera worked fine, until a couple of days ago.

I decided to upgrade the firmware from version 2.0 to 2.1.
Everything seemed to work well, I got the right amount of beeps and the camera restarted (exactly like described here: http://dashcamtalk.com/itronics-itb-100hd/#Firmware).

But the next time I started the camera, it didn't work anymore.
The power light works, but that's about everything.
I tried to upgrade/downgrade again with 2 different SD-cards, without any result.
Even without SD card, I don't get any beeps or any other signs of life.

Is there something that I can do to get it to work again?
 
You tried all the things I could imagine.
Try to use another power cable and if still not working try to find some electronic repair shop like for the phones.

Good luck,
Mtz
 
Back
Top