Length & Thickness of Cable for 522GW with rear camera

[Paul Scarratt]

Hi
Having had so many Dashcams over the years some good some not so good . . I did buy one which cam with a rear cam but the cable was so thick it was impossible to squeeze it between the roof lining or pannels so I am considering buying the 522GW with the rear cam but don't want the same problem trying to fit the rear cable. . .At present, I am using a 512GW in the front & a 512G in the rear but would like both cams images on the one card . . I have a Citroen Grand Picasso so I need the cable from the front to the rear to be pretty long
and the cable not to thick. any answers or suggestions would be appreciated.
I also use this control unit to control what cam wish to use when parking via its auto timer

 

[Nextbase Support]

Hello,

The cable connecting the 522GW and Rear Window Cam is 6m.

 

[Paul Scarratt]

Hello,

The cable connecting the 522GW and Rear Window Cam is 6m.

Many Thanks
Do you know what the width of the cable is? The cable I have now is 6m but the width is 50mm & both ends have a male mini connection one straight and one at a 45deg Angle, The 50mm cable almost impossible to squeeze between the headlining

 

[Spuds]

50mm Paul, that's nearly 2 inch in old money.

 

[Paul Scarratt]

50mm Paul, that's nearly 2 inch in old money.

I think your right hahahah it's 5mm ( I think )

 

[Simcor]

The 522 cable is thinner than the old 512 cable and easier to route.

Also helps having a round 3.5mm jack end for routing as well.

The rear screen camera has a fly lead to jack plug.