Jonah
New Member
- Joined
- May 28, 2018
- Messages
- 25
- Reaction score
- 4
- Country
- United Kingdom
Updated the dash cam to R15.8 firmware three days ago and every time I get in the car it is flashing up a “low battery” warning. I’ve not driven too far (max distance 30 miles) since the update but I have charged the battery using a USB wall charger twice since updating but the low battery warning still appears.
Parking mode is enabled with the G-Sensor set at medium. I was not getting this problem before the firmware update with the same settings.
The dash cam activates parking mode when I open or close the car doors. Activation on door closing I can understand due to the motion it creates but activation on door opening seems bizarre. The dashcam was also being switched on when I picked it up from my desk when it had finished charging as well. It seems the motion sensor is very, very sensitive.
I have now set the G-Sensor to low to see if it makes any difference but I suspect the firmware update is to blame.
Does anyone have any thoughts about this?
Parking mode is enabled with the G-Sensor set at medium. I was not getting this problem before the firmware update with the same settings.
The dash cam activates parking mode when I open or close the car doors. Activation on door closing I can understand due to the motion it creates but activation on door opening seems bizarre. The dashcam was also being switched on when I picked it up from my desk when it had finished charging as well. It seems the motion sensor is very, very sensitive.
I have now set the G-Sensor to low to see if it makes any difference but I suspect the firmware update is to blame.
Does anyone have any thoughts about this?