Marcus-1 SDR vs Marcus-3 WDR

woorich

Member
Joined
Mar 24, 2014
Messages
33
Reaction score
4
Country
United States
Marcus 1 is advertised on VicoVation website as having SDR, not WDR +3DNR image processing.
Marcus 3 is shown as having WDR + 3DNR image processing; however, in the specifications box, it says "smart dynamic range built in" (same as what Marcus 1 specifications box says).
TF2+ is shown as having WDR + 3DNR image processing (nothing mentioned in the specifications box).

Does this mean that Marcus 1 has a less-powerful image processor than the Marcus 3 and TF2+?
 
Does this mean that Marcus 1 has a less-powerful image processor than the Marcus 3 and TF2+?
I had read that the Marcus 1 had the Ambarella A5 chip on some sites and the Ambarella A2 on others. I was going to get a Marcus 1 to kind of replace my TF2+, but since i read conflicting information I asked Vico about it they said that the Marcus 1 will be replacing the SF2. as a result, it uses the older Ambarella A2 chipset and SDR. Marcus 1 will have a bit better image quality than SF2, but lower than TF2/TF2+.
 
Back
Top