Memory Error

BlackRose67

Member
Joined
Jan 19, 2016
Messages
39
Reaction score
7
Location
Ottawa
Country
Canada
Dash Cam
Blueskysea B1W
I got my A119 V3 installed Saturday, configured it and it was was working great.

Last night while checking the settings again, I discovered I had the frequency set 50.
I changed it to 60, formatted the card in the camera, and it resumed recording.

This morning I'm getting a memory error.
Ejecting/reinserting, formatting again in the camera hasn't worked.
Tried setting it back to 50 and formatted again, but no success.
I'll check the card on my computer when I get home tonight.

Firmware version 1.01 (shipped version), powered by the USB adapter.
Transcend High Endurance 64 GB microSD card.
 
Points to a bad or fake SD-Card. But first update firm ware to V1.02 as V1.01 is known to have some problems.

Located here Viofo A119 V3 FW1.02
 
The Transcend card couldn't be tested.
It failed and set it's read-only flag on.
Guess I lucked out that it worked at all.

I took the Sandisk high Endurance 64 GB card from my B1W, upgraded the firmware to 1.02, formatted in camera, and everything is working again.
 
Back
Top