Mini 0805 new Firware 20141101 - 60FPS

[M2RTY]

It's 20141101 dated and i assume 0805 based on the the resolutions available

 

[CheckYourLights]

Okay I'll have to make a note then can't use it until I get my 0805. Thanks

 

[Mtz]

Is there any difference looking from outside between them? Please look carefully at the lens.


enjoy,
Mtz

 

[M2RTY]

i'll check lenses once I have both cars together...

couple of bugs:

MPH is overlayed onto the screen but the value is in KPH still, makes it look like I was speeding
Clock always an hour out after rebooting even though timezone is correct
Auto power off 1 or 5 minutes fail, it shuts down 5 seconds after power is lost

can easily read numberplates of oncoming cars on highest res, 30fps

 

[mr_milo]

Pretty sure the "auto power off" refers to the time the camera will auto shut down if not being used, not the time it takes when power is removed.

 

[jokiin]

Pretty sure the "auto power off" refers to the time the camera will auto shut down if not being used, not the time it takes when power is removed.

Correct

 

[M2RTY]

Thanks for clearing that up

 

[Mtz]

You can find the original firmwares here.

enjoy,
Mtz

 

[Rayman.Chan]

I'd like to have a look at the firmware. Can you uplaod it somewhere? Did you extract it with an autoexec.ash script?

sorry i just got the message here is the Nov.14 version:
www.megcn.com/cn/upload/product/dvr/X34/firmware/20141114%200805%20firmware%20GPS%201card.zip

 

[Rayman.Chan]

With the 0803 an ELF file might be able to fix it, but I am not sure how to use them. I'm sure someone who does can chime in.

you need to use a special upgrading cable (not same as USB signal cable) and the ELF upgrading program to make it happen.
usually the upgrading cable only been provided to the OEM customers to short the guarantee procedure.
If you purchase your camera from online store, you have to return the camera to factory to root, or DIY a upgrading cable yourself.

 

[CheckYourLights]

DIY a upgrading cable yourself.

Now that you mention that I think a few people have had to DIY what they called a burning cable I think.

 

[Tobi@s]

sorry i just got the message here is the Nov.14 version:
www.megcn.com/cn/upload/product/dvr/X34/firmware/20141114%200805%20firmware%20GPS%201card.zip

I already got access to this one I thought the firmware OP was talking about could be possibly a 0803 update. But unfortunately it's not.
Do you have a more recent firmware than the one from your website?

 

[CheckYourLights]

I already got access to this one

I was just about to ask if you needed it before I flashed 11.26 The one I got had 11.14 preinstalled.