mini0906 not always powering up after starting the car

mbgar

New Member
Joined
Jan 23, 2019
Messages
13
Reaction score
2
Country
Germany
I wired my mini0906 to the hardware kit with parking guard. Currently I only use the front cam, as it is too cold to wire the back cam.

I noticed that the camera not always powers up when starting the car. Friday I have the 2 picture per second video, but the camera did not power up after starting the car and therefore there is no video from the ride.

Does anybody know, why it is doing so?
 
Have you connected the red cable to a constant 12v supply and the yellow to a switched/accessory supply. Without both wires correctly connected it will go to parking mode constantly.


Sent from my iPhone using Tapatalk
 
yes. Parking Guard activates, Camera activates when starting the engine.
Just not always.

When (IF) I notice, I can press the switchon button on the cam and it starts, so it is not wiring.
 
Try connecting the micro usb straight to the camera bypassing the gps unit. You’ll at least verify which part is perhaps faulty.


Sent from my iPhone using Tapatalk
 
Back
Top