A peek inside the Mobius Maxi (pre-release sample).
The case is held together with 2No small screws at the front of the case, and two lugs at the rear of the case. The lens holder sits within the split barrel opening at the front of the case. This will make it much easier to accommodate any third party lenses than the Mobius 1, where some lenses would clash with the case. Also note that the FRP lens holder has a set screw for easy focus adjustment and lens replacement. The Maxi comes with a 950mAh battery, which is enough for 140 minutes at 2.7k 30fps or 100 minutes at 1080p 60fps.
Beneath the battery is the PCB. The lens ribbon cable connects to both the PCB and the lens module with a socket and clamping bar, similar in design to the Mobius 1 and Mobius 2. Note that the battery connector is smaller than that on the M1 and M2. It is understood to be the same as that used in the Mobius Mini. At the top of the case you can see an antenna for the WiFi function, which is not yet enabled on the Maxi.