riruiz_88
New Member
- Joined
- Mar 21, 2016
- Messages
- 4
- Reaction score
- 0
- Country
- Australia
- Dash Cam
- Mobius C2
Hello,
What I would like to do is setup the front and rear cameras to be able to record motions without having the car turned on. At the moment I only have one front camera, hard wired to the car battery through a relay to only turn on once the car is in On/Crank mode. The relay consists of:
-Constant 12V
-Switched constant 12V
-On/Crank 12V
-Ground
I do not want to resort to having the cameras record 24/7, as this will reduce the life of the battery and charge. Also which setting would be best to prevent nuisance recording, Mobius sensitivity set to Normal or High?? (what do you suggest?)
What I would like to do is setup the front and rear cameras to be able to record motions without having the car turned on. At the moment I only have one front camera, hard wired to the car battery through a relay to only turn on once the car is in On/Crank mode. The relay consists of:
-Constant 12V
-Switched constant 12V
-On/Crank 12V
-Ground
I do not want to resort to having the cameras record 24/7, as this will reduce the life of the battery and charge. Also which setting would be best to prevent nuisance recording, Mobius sensitivity set to Normal or High?? (what do you suggest?)