Tom Butler
Well-Known Member
- Joined
- Oct 9, 2013
- Messages
- 295
- Reaction score
- 273
- Location
- Manchester
- Country
- United Kingdom
- Dash Cam
- Street Guardian SG9665GC v3 & Mobius (rear facing)
My first set up served me well for a good while. However, the various tapes and velcro finally gave up the ghost with the heat. Knocked up a more permanent solution using a plastic box I found lying around, the PCI blanking plate again and a wooden wedge. Bought some two part epoxy resin, Plasti-kote spray paint and some magnets off Amazon.
Again the design was to allow a secure fixing with the ability to easily mount and dismount the camera. The two lips allowed ensured the camera would be aligned consistently when pushed against the lips.
Again the design was to allow a secure fixing with the ability to easily mount and dismount the camera. The two lips allowed ensured the camera would be aligned consistently when pushed against the lips.
Attachments
-
20150616_154618_resized.jpg232 KB · Views: 98
-
20150616_161445_resized.jpg347.3 KB · Views: 90
-
20150618_171144_resized.jpg263.5 KB · Views: 87
-
20150703_172506_resized.jpg319.2 KB · Views: 89
-
20150705_173907_resized.jpg239.4 KB · Views: 90
-
20150706_193338_resized.jpg281.9 KB · Views: 92
-
20150706_193056_resized.jpg296 KB · Views: 96
-
20150706_193239_resized.jpg365.6 KB · Views: 84
-
20150706_193134_resized.jpg232.3 KB · Views: 95
-
20150706_193016_resized.jpg244.5 KB · Views: 87