Need help to connect to Aukey DR-H2

mu5e

New Member
Joined
Aug 4, 2017
Messages
1
Reaction score
0
Country
United States
Greetings!
I've bought a used car, it had prewired dashcam Aukey DR-H2.
Problem is, it does not record anything. I put 8Gb memory card, formatted ext fat32.
Nothing gets recorded. Camera has lights on, so it is doing something.

Also, it crates a wifi network "StiggyCam" to control it via app, but I dont know the wifi password,
I found a manual, but weird thing it says wifi name should be different and password "1234567890" does not work.
https://fccid.io/2AHKG-DRH2/Users-Manual/User-Manual-2925854.pdf

Also, I've tried to reset it via holding reset, didn't help.

Any suggestions?




https://www.amazon.com/gp/B01B4KKWUM
 
Last edited:

DT MI

Well-Known Member
Joined
Oct 10, 2014
Messages
5,165
Reaction score
3,984
Location
Michigan
Country
United States
Dash Cam
Too Many - See Signature
Greetings!
I've bought a used car, it had prewired dashcam Aukey DR-H2.
Problem is, it does not record anything. I put 8Gb memory card, formatted ext fat32.
Nothing gets recorded. Camera has lights on, so it is doing something.

Also, it crates a wifi network "StiggyCam" to control it via app, but I dont know the wifi password,
I found a manual, but weird thing it says wifi name should be different and password "1234567890" does not work.
https://fccid.io/2AHKG-DRH2/Users-Manual/User-Manual-2925854.pdf

Also, I've tried to reset it via holding reset, didn't help.

Any suggestions?




https://www.amazon.com/gp/B01B4KKWUM
Card most likely needs to be formatted to FAT32 (standard for almost all dash cams) vs. ExFat.

Default WiFi was probably changed by the prior owner. You can try resetting the cam to factory defaults to undo that. No idea why resetting didn't change that unless there are multiple reset options.

Edit: Probably a dumb question but, was the camera powered on when you pressed the reset? (Just asking, 'just in case'.)
 
Last edited:

Zardoz66

Active Member
Joined
Jun 15, 2017
Messages
111
Reaction score
44
Country
United States
Dash Cam
VIOFO A119 V2
I did a lot of digging around, not much out there on this cam. I found the FCC stuff on it, but aukey seems to have end of life this cam and dumped all support for it.

I would agree with the Fat32 format, but the big problem is a lot of the setting and control seem to be in an app, and I was not able to find that as well.

needless to say, I think you going to have some issues setting it and getting files off it.

I would say dump it and get something newer and supported.
 
Top