aniva
Member
- Joined
- Jun 4, 2016
- Messages
- 30
- Reaction score
- 0
- Country
- Canada
Anybody can provide reference on the best connectivity options for DVR mirror, which requires following inputs:
1. ACC - powered when ignition on
2. BAT - constant 12V
3. Reverse - powered when car switched to reverse gear
I am looking to connect all of it under dash, so wires from reverse camera will be connected under dash as well as wires from DVR mirror. This is dual-channel DVR that records from front and rear. Reverse camera will be always powered from BAT.
I hope to use add-a-circuit for at least ACC and BAT but looking for guidance on exact connection options under the dash
Any comments on the correctness of the diagram below are greatly appreciated
1. ACC - powered when ignition on
2. BAT - constant 12V
3. Reverse - powered when car switched to reverse gear
I am looking to connect all of it under dash, so wires from reverse camera will be connected under dash as well as wires from DVR mirror. This is dual-channel DVR that records from front and rear. Reverse camera will be always powered from BAT.
I hope to use add-a-circuit for at least ACC and BAT but looking for guidance on exact connection options under the dash
Any comments on the correctness of the diagram below are greatly appreciated
Last edited: