Newbie questions

[JayB]

What is auto-restart and when is it activated? BTW I have no need for parking mode.
What is boot delay and why is it relevant?
Image - what is optimal resolution/fps? Default is 1920 x 1080 30 fps.
Quality - standard, med high. Why not always use high? Micro USB is 32gb. I suppose higher resolution would take up more space on the SD.
Thanks
Jay

 

[Street Guardian USA]

What is auto-restart and when is it activated? BTW I have no need for parking mode.
What is boot delay and why is it relevant?
Image - what is optimal resolution/fps? Default is 1920 x 1080 30 fps.
Quality - standard, med high. Why not always use high? Micro USB is 32gb. I suppose higher resolution would take up more space on the SD.
Thanks
Jay

Auto Restart – Default 1 MIN – Setting to automatically restart the DVR if
there is no active recording or power is interrupted during boot.
http://bit.ly/SGGCX2PROmanualEN (Page 10)

The default is good. You would use lower quality if you’d rather record more hours without buying a bigger card.

 

[jokiin]

higher resolution uses more space, but offers more detail

boot delay may be needed for some type of vehicles, older diesel vehicles mostly

auto restart will restart the camera if it stops recording, card error, or you enter the menu and forget to exit etc

 

[JayB]

Okay thx
Any reason to not shoot at 60 fps? Uses more memory?

 

[Street Guardian USA]

Okay thx
Any reason to not shoot at 60 fps? Uses more memory?

60FPS is an option in single channel mode. You might capture a bit more detail in daylight but the trade off is the potential for less detail at night.

If you add the optional Rear camera it will default to 30FPS front / rear.

 

[JayB]

Got it. Thanks

 

[JayB]

Besides the microfiber cloth - any liquids okay to clean the lenses? I have the CPL filter on.