dangoodwin96
New Member
- Joined
- Jan 10, 2018
- Messages
- 7
- Reaction score
- 0
- Country
- United Kingdom
Hello,
I was just about to upgrade the firmware on my dash cam and the Nextbase Relay 3 software said I can plug my dashcam into the computer and select 'mass storage'. I did then but my laptop couldn't find the dash cam for whatever reason, so I unplugged it and tried it the manual way. Manual way being plug a micro SD card into the computer, download the firmware and copy the .bin files to the sd card storage. It then said make sure your dash cam is off, plug it back into the mains or in the car then put the SD card in but I couldn't proceed with this.
Now, whenever the dash cam is on charge, the LED stays lit as blue and will not turn on. Whenever the dash cam is off charge, the LED stays off and will not turn on either.
Can anyone advise how I can resolve this issue please?
Thank you,
Dan Goodwin
I was just about to upgrade the firmware on my dash cam and the Nextbase Relay 3 software said I can plug my dashcam into the computer and select 'mass storage'. I did then but my laptop couldn't find the dash cam for whatever reason, so I unplugged it and tried it the manual way. Manual way being plug a micro SD card into the computer, download the firmware and copy the .bin files to the sd card storage. It then said make sure your dash cam is off, plug it back into the mains or in the car then put the SD card in but I couldn't proceed with this.
Now, whenever the dash cam is on charge, the LED stays lit as blue and will not turn on. Whenever the dash cam is off charge, the LED stays off and will not turn on either.
Can anyone advise how I can resolve this issue please?
Thank you,
Dan Goodwin
Last edited: