Hi,
While in parking mode, my hardwired 322GW front + rear with 32 Go Nextbase SD card records 30 seconds every 5 minutes of the night.
Does anyone should advise me what to do so as to get the PM recording only when the G sensor feels something ?
I had the hardwiring installed by my mechanicus. He told me that he set both a wire to the main battery (so the cams should receive energy all the time) and a wire to the fuse that tells the cam wether the engine has started or not, so the cam should know when PM has to start.
What can I do to fix the problem ?
The protected file weight is almost half of the SD. That is not reliable
Thank
Some informations about the 322GW settings : firmware = R19.9, SD Card fab ID = 27 ; G Sensor = medium ; timelapse = STOP ; parking mode = enabled
While in parking mode, my hardwired 322GW front + rear with 32 Go Nextbase SD card records 30 seconds every 5 minutes of the night.
Does anyone should advise me what to do so as to get the PM recording only when the G sensor feels something ?
I had the hardwiring installed by my mechanicus. He told me that he set both a wire to the main battery (so the cams should receive energy all the time) and a wire to the fuse that tells the cam wether the engine has started or not, so the cam should know when PM has to start.
What can I do to fix the problem ?
The protected file weight is almost half of the SD. That is not reliable
Thank
Some informations about the 322GW settings : firmware = R19.9, SD Card fab ID = 27 ; G Sensor = medium ; timelapse = STOP ; parking mode = enabled
Last edited: