Nextbase Duo HD buttons stuck

Stevebower

New Member
Joined
Sep 11, 2021
Messages
1
Reaction score
0
Location
Macclesfield
Country
United Kingdom
Camera has been fine for ages, but today I wanted to wipe the SD & found that the first 3 buttons are sticking - no movement at all. For context, we've just had a very hot week in UK. Not sure what to do about this. Anyone similar?
 
Hello Steve,

I'd recommend performing a battery test:

1. Remove the Dash Cam from it's windscreen mount.
2. Take the Dash Cam indoors and remove the SD card.
3. Using the USB cable provided in the box, plug it into a mains power supply (2 Amp recommended), make sure to plug the cable into the body of the camera, not through the car mount.
4. Go into the Dash Cam menu and make sure that Parking Mode is turned off (if applicable). If Parking Mode is enabled, this will affect the test.
5. Leave the camera on charge for 4 hours (or more) with the camera turned on. When fully charged, the blue charging LED should turn off.
6. Unplug the power cable, the camera should shut down.
7. Turn the Dash Cam on (using only battery power) and time how long it takes for the battery to run out and the camera to shut down.

Please note:
After performing this test, your Dash Cam will need to charged again, before reinstalling in your car.

The battery should last for 16+ minutes during the above test. If the battery lasts for less than 15 minutes, the battery may have reached the end of it's lifespan.

Kind regards,
Millie
Nextbase Technical Support
 
Back
Top