Maybe with an adapter....?Too bad THIS M16 barrel doesn't fit the Mobius....
https://www.aliexpress.com/item/Sta...0.0&pvid=386c8669-f7ba-449a-b019-95ec3b0eb5d5
F0.95.....!!
Maybe with an adapter....?
You could contact the seller, tell him the kind of camera you are using and it's screw mount distance Mobius1=18mm, Object lens mount is 20MM. see what he says about making it work, and still be able to fall back to original (M12 type) lenses and mount. You never know till you try!
The lens you posted comes with its own mount that has 20mm hole spacing. If they could make an 18mm version it might fit - the seller seems open to suggestions. However it may clash with some PCB components and the case would need to be modified. On the whole it seems unlikely to work.
You could contact the seller, tell him the kind of camera you are using and it's screw mount distance Mobius1=18mm, Object lens mount is 20MM. see what he says about making it work, and still be able to fall back to original (M12 type) lenses and mount. You never know till you try!
Respons seller:
"thank you for the photo, refer to attached, there maybe a problem our the LENs adapter,
bigger size adapter, your device housing may noth enough space to mount it."
I'm calling nogo...
Hi dirkzelf, well at least you tried. It was a long shot but sure would have been nice, Are you going to try and refocus the F1,2 lens?
2.8mm or 4mm?
You know, that lens looks very similar to the F1.5 Lens B on the Mobius Maxi, and also the F1.6 lens on the A129.
You know, that lens looks very similar to the F1.5 Lens B on the Mobius Maxi, and also the F1.6 lens on the A129.