Parking Mode Always Recording?

mastercaptain

New Member
Joined
Mar 17, 2020
Messages
1
Reaction score
0
Location
California
Country
United States
Hi, I just setup the hardwire kit and having trouble with setting up parking mode.

I installed the firmware: 20180614s

To test, I close the car door and it starts recording, but it doesn't stop recording after 3-6 minutes of sitting in the car still with it off. (Don't want it recording forever when the car is off)

Am I doing something wrong? How should it function?

I've also loaded different firmwares multiple times to test the different ones. Do I need to factory reset the entire thing? How do I do that?

Sorry for all the questions... Any insight is helpful!
@estore009
 
Last edited:
Red wire to the 12V always-on socket, Black wire to GND; Yellow wire Unconnected;

1, If the camera detects no move on G-sensor within 3 minutes, the parking mode is activated.
2, When G sensor starts being triggered during parking mode, it switches to the normal recording.
 
Connect the power not to the constant "plus", but to the line from the ignition, otherwise B1W will record constantly
 
B1W cannot read the ACC signal, so Yellow wire unconnected; And red wire to a 12V always-on socket!
 
Back
Top