Parking Mode, request a329s

[fraliex]

So I just installed my A329S w/HK6 and Powercell 8 battery pack in my 2017 Prius C.

Is there an ability to add an ability to turn off motion detection? When I park at home I cannot use motion detection because it will record all night, due to neighbors yard decorations lights flashing. I rather keep the buffered parking recordings and not "trigger" to motion. I currently have it to lowest setting.

I currently have it set to low power impact only continuous power via Powercell 8, but I would rather use timed hybrid detect>LP impact. While not "triggering" to motion and still record buffered parking mode with only impact detection.

Much love for the input.

 

[viofo]

1. If you don't want to trigger the motion, it is better to just juse the impact only mode.
2. If you still want to use the motion detection, please try disabling the interior cam if you have one, other user confirmed that the interior cam is very easy to trigger the motion, we may release a customized firmware to check.

 

[fraliex]

1. If you don't want to trigger the motion, it is better to just juse the impact only mode.
2. If you still want to use the motion detection, please try disabling the interior cam if you have one, other user confirmed that the interior cam is very easy to trigger the motion, we may release a customized firmware to check.

I want the buffered recording but the motion is on the front camera because my neighbor has lights in his yard across from where I park my car. I just don't want 1,000 videos of 40 seconds for a flashing light in my neighbor's yard.

So low power impact doesn't have buffered recording and can miss the incident happening waking up. Without direct impact evidence on video will not hold up in court or insurance.

Just would be nice to allow all "sensitivity" settings to disable that trigger, like I can with impact detection while driving.