Igg
New Member
- Joined
- Nov 24, 2019
- Messages
- 2
- Reaction score
- 0
- Location
- Toronto
- Country
- Canada
- Dash Cam
- Viofo a119 v. 3
I installed the new A119 V. 3 using original hardwire kit to the fuse box under drivers side in my Lexus RX 350 2017.
When the ignition is on, the camera works well. Yet, when the car is off and the camera is in parking mode, the hardwire kit cuts off the power and shuts down the camera at exactly 1 minute and 24 seconds.
I tried increasing voltage tolerance on hardwire kit from 12 to 12.2 and higher, and it made no difference at all.
What is causing this behavior?
My always on fuse is a 10Amp HAZ and acc fuse is connected to rear windshield 15Amp fuse.
When the ignition is on, the camera works well. Yet, when the car is off and the camera is in parking mode, the hardwire kit cuts off the power and shuts down the camera at exactly 1 minute and 24 seconds.
I tried increasing voltage tolerance on hardwire kit from 12 to 12.2 and higher, and it made no difference at all.
What is causing this behavior?
My always on fuse is a 10Amp HAZ and acc fuse is connected to rear windshield 15Amp fuse.