Power Magic Pro in Holden VE

[Exceler8r]

Hi all,

I am having trouble getting the PMP installed successfully on a Holden VE (Series 2).

Has anyone here or know of anyone who has been able to successfully install the PMP into this vehicle?

Instructions and pictures would be greatly appreciated.

Thanks in advance.

 

[jokiin]

What's the problem exactly?

 

[Exceler8r]

Well, no matter what I set the switches to on the PMP, it is constantly draining my battery. It's as if the PMP is just not functioning at all...

I tapped them into what I believed to be appropriate fuses (1 x constant power, 1 x acc power and the other was grounded) but it just won't turn the camera off automatically...

 

[jokiin]

The voltage settings on these is too low for winter, better off with the Vico power plus

 

[Exceler8r]

Thanks jokiin, but this was occurring even in summer...

Does the PMP have an internal fuse that I should check?

 

[Ralph2]

Set your switches on the PMP to shut off based on time to see if it works that way. Does it shut off power to the camera with the rocker switch? Perhaps you have the connections wrong.. the red wire to ACC the yellow to an always on source.