Q800 Pro firmware 1.01.01 released on 03/07/2019

Jeremy Wong

Well-Known Member
Joined
Apr 14, 2015
Messages
451
Reaction score
299
Location
Kuala Lumpur
Country
Malaysia
Dash Cam
Viofo A119, Viofo A119S, Xiaomi Mijia, 360 J511C, etc
Saw the Q800 Pro have new firmware 1.01.01 released on 03/07/2019

47166

Changes:
- Add Remote LiveView functionality
- Add driving only partition

No mention of improve image quality. Am going to update the firmware and test it out.
 

Philingus

New Member
Joined
Jul 3, 2019
Messages
2
Reaction score
0
Location
Düsseldorf
Country
Germany
Dash Cam
Thinkware Q800 PRO 2Ch
The imagequality wasn't improved. Sometimes (depends of the conditions of the light) the imagequality ist really crisp and the colours and the contrast are very realistic. But otherwise, I don't know the reason why, the imagequality s poor (grainy and the colours seems to be washed out).
Because I see these two different imagequalities, I am sure Thinkware will release a new firmware soon. (Pardon, I am not a native (english) speaker. There may be some mistakes ... ☹)PSX_20190707_100245.jpgPSX_20190707_100245.jpg
 
Last edited:
OP
J

Jeremy Wong

Well-Known Member
Joined
Apr 14, 2015
Messages
451
Reaction score
299
Location
Kuala Lumpur
Country
Malaysia
Dash Cam
Viofo A119, Viofo A119S, Xiaomi Mijia, 360 J511C, etc
Looking back at the F770 videos, it's way more clearer than F800Pro/Q800Pro :ROFLMAO:
 

nrvous1

Active Member
Joined
Sep 4, 2017
Messages
221
Reaction score
94
Country
United States
My q800pro has awesome video quality. I didn’t know the new firmware has live video feed. I’m going to have to update it asap.
 

know610

Member
Joined
Jan 12, 2017
Messages
94
Reaction score
10
Country
United States
Updated to latest firmware 1.01.01 cause bugs in time zone. I'm at UTC -4:00 daylight saving enabled. Live View gave correct time but in Parking Mode stamped incorrect time by 1hrs ahead. Emailed to @Thinkware Dash Cam support, they asked me to set to UTC -5:00 daylight saving enabled. Parking mode stamped correct time but Live View gave incorrect time. Previous version time zone had no bugs
 

egonvdv

Active Member
Joined
Aug 9, 2013
Messages
378
Reaction score
94
Location
A Dutchy in the South of France
Country
France
Dash Cam
Thinkware F7502CH + F7702CH (rear cams used as side cams)
Updated to latest firmware 1.01.01 cause bugs in time zone. I'm at UTC -4:00 daylight saving enabled. Live View gave correct time but in Parking Mode stamped incorrect time by 1hrs ahead. Emailed to @Thinkware Dash Cam support, they asked me to set to UTC -5:00 daylight saving enabled. Parking mode stamped correct time but Live View gave incorrect time. Previous version time zone had no bugs
same on both my cameras. I put +1 & daylight saving.
time shows correct, bu after a while gets 1hr behind (both live view & clips)
 

know610

Member
Joined
Jan 12, 2017
Messages
94
Reaction score
10
Country
United States
From Thinkware support:
Please try resetting the GPS by going to Dash Cam Info > GPS > Tap the Arrow in the Top Right until the GPS Status says connecting.

What i also find out is aftering setting time zone and saved. unplug q800pro power cable and replug

same on both my cameras. I put +1 & daylight saving.
time shows correct, bu after a while gets 1hr behind (both live view & clips)
 

know610

Member
Joined
Jan 12, 2017
Messages
94
Reaction score
10
Country
United States
Just an update:
Set my time zone to UTC -4:00 and disabled daylight saving seem worked. I know I did it last time and it's not working. But anyway, it works now.
 
Top