Q800 Pro Help

DaCrazy1

New Member
Joined
Dec 22, 2015
Messages
3
Reaction score
0
Country
Australia
Hello all,

I am thinking of buying a Q800 pro with twin cameras and i have some questions please.

1/. Will the Q800 work with no issues with a Cell Link B?

2/. If i keep the Cell Link B on will the Q800 allow for recording when parked? I read about parking mode and manual mode.

3/. Can i use any micro sd card in the Q800? I read about Sandisk Extreme Pro or Samsung Evo Select.

4/. Sill question are the camera leads for the Balckvue DR650 the same as the leads for the Q800?

Hoping i could please get some honest advice before i purchase.

Cheers
 

egonvdv

Active Member
Joined
Aug 9, 2013
Messages
378
Reaction score
94
Location
A Dutchy in the South of France
Country
France
Dash Cam
Thinkware F7502CH + F7702CH (rear cams used as side cams)
1+2) yes it will, as long as you get the thinkware hardwire kit (i myself have it on the cellink PRO battery)
3) i have sandisk 128gb without problems
4) leads?
 

Eternalblue

Member
Joined
Jul 1, 2019
Messages
38
Reaction score
14
Location
Europe
Country
Germany
4. Those are different
Blackvue is using Coax (mini) to connect rear cam Thinkware is using Micro USB. (Rear one 90 degree angled)
(As it looks you upgrade from DR650 installation will be an easy task. Most time consuming will be front to rear cable installation. Use your old cable and tie new cable to it then pull old one out and new one will be in place. Might do the trick.(Unless no cable ties are used)
 

egonvdv

Active Member
Joined
Aug 9, 2013
Messages
378
Reaction score
94
Location
A Dutchy in the South of France
Country
France
Dash Cam
Thinkware F7502CH + F7702CH (rear cams used as side cams)
ah yes, different indeed. personally my wires go through the side of the car underneath the door seals
 

BlackboxMyCar

Well-Known Member
Retailer
Joined
May 21, 2014
Messages
770
Reaction score
369
Location
Vancouver, BC, Canada
Country
Canada
Dash Cam
Thinkware, BlackVue, IROAD, Viofo, BlackSys
To clarify a bit more:

1/. Will the Q800 work with no issues with a Cell Link B?
You need to get the Thinkware hardwire kit, which then needs to be spliced to the 3 wire output cable of the Cellink B in order to receive parking mode recording.

2/. If i keep the Cell Link B on will the Q800 allow for recording when parked? I read about parking mode and manual mode.
Answer above. Not splicing the two cables together results in the Q800PRO recording in continuous mode at all times.
 
Top