Questions with my new Dome D201

Justin89

New Member
Joined
Feb 10, 2016
Messages
5
Reaction score
0
Country
Canada
Hi,

Just purchased a new Dome and have some questions with settings.

Is there a way to manually override the brightness and contrast?

Is there a way to make the screen shut off but still record? Its kind of distracting at night.

Sometimes the LED indicator light flashes red/blue and sometimes flashes red only. Why?

Finally the loop recording. I installed a small TF card just for testing purposes. Twice now it stops recording when the card is full and I get a solid red indicator light. Sometimes it works normal and loop records. I don't trust it entirely. Has anyone heard of this?

Thanks!
 
OP
J

Justin89

New Member
Joined
Feb 10, 2016
Messages
5
Reaction score
0
Country
Canada
For testing the loop feature, only 2 GB card.
Normally running a 128 Gb uhs 1
 
OP
J

Justin89

New Member
Joined
Feb 10, 2016
Messages
5
Reaction score
0
Country
Canada
Thanks. I'll keep using the larger one then.
Any ideas on the other issues I'm having?
 

jokiin

Well-Known Member
Manufacturer
Joined
Jan 27, 2013
Messages
52,479
Reaction score
30,327
Location
Sydney, Australia ~ Shenzhen, China
Country
Australia
Dash Cam
Too many ¯\_(ツ)_/¯
Led colour will change depending on the charge state of the battery

Look for a screen saver option in the menu to have the screen go off

Brightness and contrast are probably not adjustable
 
OP
J

Justin89

New Member
Joined
Feb 10, 2016
Messages
5
Reaction score
0
Country
Canada
I didn't see anything on screen saver settings.
Thanks for the other help.
 

CaptureYourAction

Well-Known Member
Retailer
Joined
Feb 6, 2016
Messages
3,824
Reaction score
2,214
Location
New England
Country
United States
Dash Cam
Viofo, GitUp
I have this dashcam. Yes, you can have screen shut off and still record. Don't recall what they call the setting in the menu. It will flash blue/red when battery is charging and flash red only when fully charged. If it's solid red, then it is no longer recording and there is an issue.
 

artful

New Member
Joined
Feb 14, 2015
Messages
4
Reaction score
1
Country
Malaysia
Hi,

Just purchased a new Dome and have some questions with settings.
Congratulation on your new purchase.
Is there a way to manually override the brightness and contrast?
No manual override support.
Is there a way to make the screen shut off but still record? Its kind of distracting at night.
Under system setting>backlight off setting> change to your desire mode.
Sometimes the LED indicator light flashes red/blue and sometimes flashes red only. Why?
red/blue means device is charging and recording. Red recording with full batt.
Finally the loop recording. I installed a small TF card just for testing purposes. Twice now it stops recording when the card is full and I get a solid red indicator light. Sometimes it works normal and loop records. I don't trust it entirely. Has anyone heard of this?

Thanks!
 
Top