Vollekanne
New Member
I've discovered a serious issue with the radar parking mode on my Thinkware U3000 PRO, running firmware 1.00.06.
At approximately 5:57 PM, my neighbor parked behind my car, got out, and continued moving around his vehicle.
The radar detected the initial movement and recorded a 20-second clip.
However, the recording stopped while my neighbor was still moving around behind my car, and no further recording was triggered.
I also noticed a 30-second gap between the previous recording and this event, meaning potentially important footage is missing.
I've been able to reproduce this behavior. The camera detects someone approaching or walking around my car, records 20 seconds, and then fails to record further activity.
However, reliable parking surveillance is far more important to me than saving a few watts if critical evidence is lost.
For me, this is a complete dealbreaker.
Imagine someone hitting your parked car, staying nearby for another minute, and then driving away. You might have the initial event on video but completely miss the person leaving or their license plate.
I really like the U3000 PRO, especially its excellent radar power efficiency. However, for a dashcam costing around 590 €$, this is unacceptable.
Thinkware should at least allow users to configure event recording durations (60, 120, or 180 seconds) or automatically extend recording while movement continues.
I've also seen an independent review here, reporting similar recording gaps of 33–39 seconds with firmware 1.00.01. Unfortunately, my unit is already running 1.00.04.
Has anyone else experienced this issue with the U3000 PRO? Does your camera consistently trigger additional recordings when movement continues after the initial 20-second clip?
I'd really like to know whether this is a general firmware limitation or a bug that Thinkware still hasn't fixed.
At approximately 5:57 PM, my neighbor parked behind my car, got out, and continued moving around his vehicle.
The radar detected the initial movement and recorded a 20-second clip.
However, the recording stopped while my neighbor was still moving around behind my car, and no further recording was triggered.
I also noticed a 30-second gap between the previous recording and this event, meaning potentially important footage is missing.
I've been able to reproduce this behavior. The camera detects someone approaching or walking around my car, records 20 seconds, and then fails to record further activity.
However, reliable parking surveillance is far more important to me than saving a few watts if critical evidence is lost.
For me, this is a complete dealbreaker.
Imagine someone hitting your parked car, staying nearby for another minute, and then driving away. You might have the initial event on video but completely miss the person leaving or their license plate.
I really like the U3000 PRO, especially its excellent radar power efficiency. However, for a dashcam costing around 590 €$, this is unacceptable.
Thinkware should at least allow users to configure event recording durations (60, 120, or 180 seconds) or automatically extend recording while movement continues.
I've also seen an independent review here, reporting similar recording gaps of 33–39 seconds with firmware 1.00.01. Unfortunately, my unit is already running 1.00.04.
Has anyone else experienced this issue with the U3000 PRO? Does your camera consistently trigger additional recordings when movement continues after the initial 20-second clip?
I'd really like to know whether this is a general firmware limitation or a bug that Thinkware still hasn't fixed.