Cobra2000
New Member
I'm testing a new A119 V3 kit I purchased from viofo-official-store on eBay. I have it hooked up to a regulated 13.8V DC 25A power supply, using an HK3 wiring kit (red and yellow wires hooked together) and plugged into the Viofo GPS usb port. I had it positioned in front of a window for about an hour and a half. I have loop recording set at 3 minutes, using 2.4 firmware. Memory card is a new Sandisk Max Endurance 256GB sdxc, formatted to FAT32 using guiformat2 (FAT32 Format) and then formatting it in the camera. Card was tested with h2testw_1.4 on both write and verify. No errors. The files being saved are anywhere from 1-3 minutes in length. What could be causing this random file size / length issue? Attached is a windows screen snip of the different file sizes. I also noticed the cam goes from solid red rec light to flashing red, then back to solid red after a minute or so. I presume that's when it's writing to the memory card.