Agie
Well-Known Member
- Joined
- Aug 19, 2016
- Messages
- 1,763
- Reaction score
- 870
- Location
- Perth, Australia
- Country
- Australia
- Dash Cam
- 70mai S500, A229 Pro, VS1, Nexus 4 Pro, S1 Pro, A119 v3v2v1
Hi guys,
So i have already installed a Viofo A119 in the front of my car, which is a Hyundai Getz 2010 model (three-door hatchback), which is sometimes known as a Hyundai Click.
Anyways I was looking at installing a Viofo A118 in the back of my car, but was unsure how to go about it. I don't wish to hard-wire any of the cams, and I have a few questions.
1. Is it ok for me to power the A118 in the other port of the dual USB cigarette lighter charger I already am using? (I don't wish to hardwire any of the cams)
2. Is there a very long miniUSB cable that I can run from the front of my car through the weather seals to the back of my car?
3. What's the best mounting solution for the dashcam as it will live on the back windshield
Any and all advice much appreciated
So i have already installed a Viofo A119 in the front of my car, which is a Hyundai Getz 2010 model (three-door hatchback), which is sometimes known as a Hyundai Click.
Anyways I was looking at installing a Viofo A118 in the back of my car, but was unsure how to go about it. I don't wish to hard-wire any of the cams, and I have a few questions.
1. Is it ok for me to power the A118 in the other port of the dual USB cigarette lighter charger I already am using? (I don't wish to hardwire any of the cams)
2. Is there a very long miniUSB cable that I can run from the front of my car through the weather seals to the back of my car?
3. What's the best mounting solution for the dashcam as it will live on the back windshield
Any and all advice much appreciated