SGZC12SG is getting really wobbly on the slide-on mount

Damn Dirty Ape

Active Member
Joined
Jun 18, 2015
Messages
209
Reaction score
27
Location
Illinois
Country
United States
For the first months it was tight as it could be,m but now it is getting pretty loose forward and back and side to side. Is there any fix for this? It isn't taken off the often at all, and is occurring on the short suction and flat short mount.

Also, I presume this is a v1, firmware releases?
 
We can send you a new mount no problem. (Private message me your name addresss email and original order number we can link to in our system.

The latest SGZC12SG v2 firmware has a special procedure that requires units to be flashed on our test bench. You're welcome to send in your unit for flashing if you need/want the following new features.

12/15/18 Mbps bit-rate selection
(Higher equals higher quality but eats up more storage space)

Consolidated single dark OSD bar at the bottom
(Nothing on top, dark bar is nicer)

Enable/Disable embedded OSD
(If you want an unmarked video)

If this is worth it to you check out with the following page. (Private message me for the link)
 
Last edited:
Back
Top