[SOLVED] Unbrick do not work progress [41

[druckgott]

Hallo I have the problem that it always stops at 41 percent when i upload yifirmware.bin
I have done the progress with the elf file bevor I have a Z221....
Can anybody help me?

I have testet it many times with different elf files always the same.

 

[druckgott]

So I could solve it, it was not a problem of the firmware it was a problem of the hardware. the Cable in the camera which connects the cam itself to the platine was not connected any more. I have a small crash with my modell airplan bevor and there the cable have been disconnected. So I oppend the 4 Screws on the camera and connected the cable in the red circle on the picture again fully. Switch on the camera and it worked perfekt. So if you have stop working update on [41 in the progress file maybe you have the same problem.