Stop start wiring

Hyundai kona 2024

Active Member
Joined
Nov 29, 2016
Messages
206
Reaction score
38
Location
bristol uk
Country
United Kingdom
Dash Cam
thinkware t700 lte
I have a thinkware f800 pro. Just brought a car with stop start engine.
Dose the f800pro have to be wired differently.
Ie brought a skoda superb mk3
 
There is no difference in the wiring for start stop cars, but it's advisable to turn off the start stop function before you reach your destination so that the battery is charged sufficiently for F800 pro parking mode.
The duration to fully charge your battery depends on your car. I have a power splitter with built in volt meter to see the car battery status but usually I turn off the start stop system as on my Toyota, it shivers too much when moving off from traffic.
 
many thanks.
i also have a couple of cellink batterys so that should help. :):):):)
 
Do not use the start stop circuit..

I had mine installed and it blew fuses and caused many issues, car recovered etc

Use a spare slot.. easier and less hassle




Sent from my iPhone using Tapatalk Pro
 
as my car is a posative feed i was going to use the heated rear windowscreen fuse as that is swithed live,
2014 skoda superb
 
I have a Q7 and it had a few empty. Make sure you have the carrier the right way around so the current runs through the fuses the right way around. Any variations in dust size could either blow your camera fuse or the heated window fuse..




Sent from my iPhone using Tapatalk Pro
 
Back
Top