So my mini 0906 just got installed. Writng this to figureout the causes of issues am facing. May be It could be due to the way i have installed it also.
Its using a Hardwire Kit, Redwire connected to Always On fuse using Fusetap. Yellow wire is not connected yet as i need to get a new Fuse tap for it. Ordered, Waiting....
As the C10 Samsung Evo 128g mem card is still on its way, i have just kept a C4 8 gb card for getting the functionalities tested.
Camera Firmware - 20171121 V1.
Issues and Doubts on functionalities.
How to make the rear and front cam record together?.
i can see recordings from single camera in its folders, not both together. Noticed something like, if i switch display to rear and its on record, it will save rear cam video, if display is on front camera, it records front one.
The resolutions kept are well in 1080p30fps modes. Its switching to 720*720 often by itself when am starting cam. Seems like this is the parking mode coming into play. Will be doing the yellow wire to acc connection soon, meantime is there a way i can make it work normally by keeping the redwire connected into an always on fuse?.
Is there any particular option i need to set or enable if i need to make the front and rear cameras record together?
How to make the RF remote work smooth. I have seen it working and taking snapshots and locking videos a couple of times.. But often its not connecting to the camera at all, and no effect is seen on pressing the buttons multiple times or in long presses!!
Overall UI response of the camera is very sluggish. I need to press the up arrow long or long press and after that multiple presses to take it to settings menu. Its not responding in a constant/stable manner. To browse through recorded files, the menu came up once on pressing down arrow long.. Now its not seen coming up. Can you give the exact menu or button presing pattern to access the recorded videos through camera buttons?.
All above sluggishness i mentioned i have tested keeping the motion sensor off mode also as i have seen the camera getting very busy if that sensor is kept on, in a live environment.
Is all these isues due to the C4 memmory card am having in it and the single wire connection power? Or is there something wrong with the hardware or software ?
Often the camera gets busy in things and if i try to switch it off and restart i will have to do multiple long power button press. seen this often if am trying to turn it off when the cam is recording.
Its using a Hardwire Kit, Redwire connected to Always On fuse using Fusetap. Yellow wire is not connected yet as i need to get a new Fuse tap for it. Ordered, Waiting....
As the C10 Samsung Evo 128g mem card is still on its way, i have just kept a C4 8 gb card for getting the functionalities tested.
Camera Firmware - 20171121 V1.
Issues and Doubts on functionalities.
How to make the rear and front cam record together?.
i can see recordings from single camera in its folders, not both together. Noticed something like, if i switch display to rear and its on record, it will save rear cam video, if display is on front camera, it records front one.
The resolutions kept are well in 1080p30fps modes. Its switching to 720*720 often by itself when am starting cam. Seems like this is the parking mode coming into play. Will be doing the yellow wire to acc connection soon, meantime is there a way i can make it work normally by keeping the redwire connected into an always on fuse?.
Is there any particular option i need to set or enable if i need to make the front and rear cameras record together?
How to make the RF remote work smooth. I have seen it working and taking snapshots and locking videos a couple of times.. But often its not connecting to the camera at all, and no effect is seen on pressing the buttons multiple times or in long presses!!
Overall UI response of the camera is very sluggish. I need to press the up arrow long or long press and after that multiple presses to take it to settings menu. Its not responding in a constant/stable manner. To browse through recorded files, the menu came up once on pressing down arrow long.. Now its not seen coming up. Can you give the exact menu or button presing pattern to access the recorded videos through camera buttons?.
All above sluggishness i mentioned i have tested keeping the motion sensor off mode also as i have seen the camera getting very busy if that sensor is kept on, in a live environment.
Is all these isues due to the C4 memmory card am having in it and the single wire connection power? Or is there something wrong with the hardware or software ?
Often the camera gets busy in things and if i try to switch it off and restart i will have to do multiple long power button press. seen this often if am trying to turn it off when the cam is recording.