Thieye T5E doesn't turn on

coolkain

New Member
Joined
Nov 11, 2017
Messages
5
Reaction score
0
Country
Spain
I bought my cam and It never turned on, only the leds and the display gets black withe the backlight on, sometimes the cam turns on but saddenly gets freeze. I tried to flash with the last firmware but the problem persists. What can I do?
 
Did you try flashing by direct usb? You may have to try it a few times.
 
You didn't give any details. Is the flash successful?
 
Yes the flash is succesful, here is the log:
Found 1 AMBA device!
AMBA_USB_Dev_Scan.
Reinit start wait.
[0] Found.
[0] AMBA_USB_Reinit_Wait. (0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0000,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0xb0329ac3,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0004,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0008,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x1100,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e000c,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0010,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x12900,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0014,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x103900,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0018,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x5f5100,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e001c,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x4bf100,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0020,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x4c4100,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0024,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x593100,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0028,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0xc00900,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e002c,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0030,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0034,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0038,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e003c,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0040,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0044,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0048,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e004c,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0050,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
AMBA_USB_Simple_Command: (0x0,0x8,0x1,0x33e0054,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0866EF54,0x00000000)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x0,0x0,0)
PART_BST: success (4352)
PART_BLD: success (76032)
PART_UPD: success (1063168)
PART_SYS: success (6246656)
PART_DSP: success (4976896)
PART_ROM: success (4997376)
PART_LNX: success (5845248)
PART_LFS: success (12585216)
Firmware Programming Success!
Reinit start signal.
 
And sometimes the display actually displays correctly but freezes?
 
I was going to suggest chg lcd in the autoexec.ash but it sounds like there is actually something wrong with the camera, you should exchange it imo
 
Back
Top