Hi,
my goal was to record in stereo from external microphone, but i am somehow stuck:
I have a 2,5 mm TRRS jack and i found the following pinout:
---cable--:S|R1|R2|T
S: +3V
R1: Detect external Mic when pulled to +3V
R2: Right Mic (at about 2,414 V open circuit when R1 is pulled to +3V)
T: Left Mic (at about 2,414 V open circuit when R1 is pulled to +3V)
Connecting the right mic works, but the recorded audio is on both the left and right track while the left mic is not recorded at all
However T (right) and R2 (left) are not shortend, there is about 4,2kOhm of resistance
Is this a defect, or does anyone else has this issue ?
Model: ThiEYE T5e
Serial: FT501709xxxx
Version: TI/UN7-171114-V5.1
regards
Georg
my goal was to record in stereo from external microphone, but i am somehow stuck:
I have a 2,5 mm TRRS jack and i found the following pinout:
---cable--:S|R1|R2|T
S: +3V
R1: Detect external Mic when pulled to +3V
R2: Right Mic (at about 2,414 V open circuit when R1 is pulled to +3V)
T: Left Mic (at about 2,414 V open circuit when R1 is pulled to +3V)
Connecting the right mic works, but the recorded audio is on both the left and right track while the left mic is not recorded at all
However T (right) and R2 (left) are not shortend, there is about 4,2kOhm of resistance
Is this a defect, or does anyone else has this issue ?
Model: ThiEYE T5e
Serial: FT501709xxxx
Version: TI/UN7-171114-V5.1
regards
Georg