Thinkware f750 wiring question

[Matt84]

Hi,

I've bought the above camera...just wondering what on earth to do with the red and yellow wires.

I'm needing constant power for parking mode and it's going into a 2010 Fiesta.

The red and yellow wires have inline fuses but I'm just wondering where I connect and if I need fuse taps.

Thanks!

 

[jokiin]

one is a permanent power feed, the other is ignition switched, they should be marked accordingly and yes fuse taps are an easy way to install

 

[randy]

I used add-a-fuse wires on my cams and it was much easier....you just crimp the two wires together. If you don't, I believe you can just wrap the bare part of the wire around one of the legs of the fuse and plug it back in. One wire goes to a fuse slot that has power when the vehicle is off, and one goes to a slot for power when the vehicle is on.