This symbol is always on every time I get in my car

Ansley12

New Member
Joined
Jun 4, 2019
Messages
12
Reaction score
3
Location
Victoria, British Columbia
Country
Canada
Hello, I have a Viofo A129 Duo. I currently only use the front camera, I recently just updated the firmware to V2.1 and ever since this triangle symbol with an exclamation point shows up every time I get in from leaving it parked. My dashcam is hardwired and has never done this prior to the update. I have attached screenshots including my current setting.

I also would like to consult you guys if my settings are good (like should I use WDR etc etc). Thank you for reading
 

Attachments

  • 054238D9-233D-46E3-83D8-1205EAA07D57.jpeg
    054238D9-233D-46E3-83D8-1205EAA07D57.jpeg
    307.3 KB · Views: 52
  • 2B49D7B1-1FAA-40E8-9066-C55C938180DF.jpeg
    2B49D7B1-1FAA-40E8-9066-C55C938180DF.jpeg
    126 KB · Views: 51
  • D9F58BDE-5D39-4E43-A37F-9F01DC499329.jpeg
    D9F58BDE-5D39-4E43-A37F-9F01DC499329.jpeg
    136.9 KB · Views: 34
  • C6DC5A65-2DE3-4786-B78E-BFA9A2D1B91B.jpeg
    C6DC5A65-2DE3-4786-B78E-BFA9A2D1B91B.jpeg
    124 KB · Views: 27
  • 32BD58A3-071B-4AFC-826A-7BAE45926F8D.jpeg
    32BD58A3-071B-4AFC-826A-7BAE45926F8D.jpeg
    112.9 KB · Views: 33
That symbol is alerting you that a G-sensor event occurred. Unless, there was indeed an event during parking that you'd need to be aware of your G-sensor sensitivity is turned up too high.

Try changing it to a lower sensitivity.

g-sensor.jpg
 
Back
Top