Trouble with DR550GW - Custom Firmware 1.2

Saj

Member
Joined
Apr 25, 2014
Messages
70
Reaction score
13
Location
Nelson, Lancashire
Country
United Kingdom
Dash Cam
Blackvue DR550GW
Hi, just wondering if you got any ideas?

I bought a Sandisk Ultra 64gb memory for it and have the custom firmware 1.2, but kept the bit rates at 6 front and 3 rear.

I couple of times its just frozen, with the Blue and Red LED constantly on all the time, when i put the original SD card back in its fine, it only works on the 64gb if I format the 64gb on a PC and start fresh.

Any ideas on what could be wrong?
 
Try formatting with using the firmware instead of in your PC.

I didn't experience this using the Ultra - but it is really too slow to make proper use of the firmware.
 
how old is your sandisk memory card?

I know that it fails working after approx 3 months if you use it regularly. The given MTBF is wrong, the chips just reach the End of lifetime. A full format will expose that failure.
 
It was brand new a days old. It was the custom firmware. Gone back to 2.002 and it works fine, bar a few issues with the power magic pro.
 
Back
Top