Tomott

New Member
Joined
Mar 24, 2020
Messages
3
Reaction score
0
Location
Budapest
Country
Hungary
Hi,



I have a Thinkware U1000, and a Cellink Neo. My problem is that I have only the following cable for the Thinkware dashcam, what connects to fusebox.

How can I connect the dashcam into the battery. Can I modify this cable to connect somehow into the battery or I have to get an another cable.



Thanks,

G
 

Attachments

  • D95D13C8-2D1F-4A9C-B08F-FDEE9C8F80A8.jpeg
    D95D13C8-2D1F-4A9C-B08F-FDEE9C8F80A8.jpeg
    586.1 KB · Views: 30
  • 9023D985-775F-403A-8992-3447F3F881E4.jpeg
    9023D985-775F-403A-8992-3447F3F881E4.jpeg
    376.6 KB · Views: 30
You need Molex 43645 connector (that's the black one with four pins) for the camera/cable. XT60 connector (every RC hobby store has it) and a fuse tap (size according to used fuses) for the connection to fusebox.
 
Last edited:
Thanks for help.

I got the following cable for the Cellink Battery - I would like to connect it into the Cigar Slot.

The problem is that I have the unspliced cable for the U1000 and I have to create a spliced one.
 

Attachments

  • image.jpg
    image.jpg
    209 KB · Views: 18
Aaahh, then you need just the Molex connector in order to connect the "unspliced cable" into the Cellink. If you plan to connect the battery pack into a cigar slot, then you can go for it. If you want the connection in a fusebox you need to get rid of the cig connector on the Cellink cable a crimp the fuse tap.
 
Thread starter Similar threads Forum Replies Date
T U1000 2
H U1000 1
T U1000 2
R U1000 0
M U1000 2
Back
Top