Unbrick camera

qaz

New Member
Joined
Jul 5, 2019
Messages
4
Reaction score
0
Location
Poland
Country
Poland
Hi!
When try to update camera 70mai smart dash cam pro to latest firmware 1.0.5 from 1.0.4 then my camera is brick. Now I can't power on. Any one have trick to unbrick?
Thanks :)
 

Roturbo

New Member
Joined
May 7, 2019
Messages
15
Reaction score
5
Country
Portugal
-
Hello,

did you try the same sequence as you did for firmware update ?

UPDATE folder inside card, press right button and next POWER button ?

Did you have the power cable connected on first attempt and
the parking mode disabled ? ?

Please inform.

.
 
OP
Q

qaz

New Member
Joined
Jul 5, 2019
Messages
4
Reaction score
0
Location
Poland
Country
Poland
Yes. I try this and not work. :( I don't now what happen.
 

Roturbo

New Member
Joined
May 7, 2019
Messages
15
Reaction score
5
Country
Portugal
.
You may also try this...


"""" quote from the link """"
Use the service firmware. Instructions there in the pictures.
And after restoring, flush the firmware you need again.

----------------------------------------------------------------


There is other person with same problem,, you can download a file "70mai pro.zip" with firmware
and instructions to recover it, next you can flash it again with other version.

Just follow each step with attention.

.
 

JCCAS

New Member
Joined
Jul 8, 2019
Messages
4
Reaction score
0
Location
Santiago
Country
Chile
Hi guys, I just dowloaded the file and tried to update as the instructions shown. However after the camera showed the Updating screen, the screen went of and wasn't able to turn it on again. It returned to its previous state. Yesterday I was able to use the camera conencted to the car, but after 1 hour it went off and wasn't able to powwer on again. When connected to the car power, the led blinks constantly. Any advice?
 
Thread starter Similar threads Forum Replies Date
Y 70Mai Pro 1
R 70Mai Pro 4

Similar threads


Top