Unit locked

poisons

New Member
Joined
Jul 19, 2021
Messages
10
Reaction score
1
Location
Bali
Country
Indonesia
I just installed the DVR, and image from the back camera was flickering. I tried to move the back camera cable, and it freezed. Front camera still working. I turn off the bike and now the DVR will not go off. No WiFi to connect
 
Pull power and wait for it to run down and go off, will happen eventually

If there is a reset switch you can try press and hold that for a few seconds also
 
No reset switch.

Just to help somebody else, this is how I solved:
Detach from the battery and wait it goes off, then put on again, basically you have to make a restart. Then the wifi was not allowing me to enter, just remove the network from your phone and add again.

Just curious how, just moving the cable on the back of the camera, would have freezer everything
 
no, not the plug. I just was moving the cable on the back of the camera, just on the back
 
No reset switch.
There is a reset hole near this Mirco USB slot in the main DVR unit, which under this silicon cover;
Just curious how, just moving the cable on the back of the camera, would have freezer everything
Unplug and plug! And make sure its connectors are stable!
 
Thread starter Similar threads Forum Replies Date
S B1M 5
Back
Top