Vantrue N4S / 3CH HDR Clear Recording / Triple STARVIS 2 IMX675 CMOS Sensor / Novatek NT98529 / PlatePix™/ Smart Voice Control / Video and Screenshots

Karagandinez

Well-Known Member
Joined
Nov 27, 2020
Messages
3,033
Reaction score
4,065
Location
Deutschland
Country
Germany
Dash Cam
At the moment Viofo, Vueroid and Vantrue
I also received a new Nexus 4S for testing.
Thanks to Wendy and the Vantrue team for providing the model.

Package_10.webp
 
There are enough professional photos in the "N4S" threads,
so adding photos of my example is unlikely to add information about the model.
A lot of information about the Nexus 4S has already been written.
The only thing I didn't notice anywhere was any mention of the processor installed on this model.
When I asked about the processor, the Vantrue representative replied that this model has a Novatek NT98529.
 
If you want to see good photos of this model, I recommend you take a look at the topic located at the link below.
I hope the author of the topic won't mind me posting a link to his topic here.

 


I forgot to enable the PlatePix function in the menu settings.
I think it would look better with PlatePix.
 
Bitrate and size of minute clips during normal recording.

Main camera:

Resolution: 2560X1440
Bitrate=14.8 Mb/s
Minute file size=106MB

Interior camera:

Resolution: 2560X1440
Bitrate=14.8 Mb/s
Minute file size=106MB

Rear camera:

Resolution: 2560X1440
Bitrate=14.8 Mb/s
Minute file size=106MB
 
Vantrue has added a new Hardwire Kit to its lineup: the Voltage Display OBD Cable.
It's useful for car-sharing users who frequently move their dashcams from one car to another.
Vantrue now has a wide range of Hardwire Kits to suit every need and price.


But as I wrote earlier here:

Personally, I prefer two of the four, which I find more suitable for permanent installation.

Hardwire KIT_VP05.webp
 
Back
Top