Vico Marcus 3 Firmware Upgrade

ics

Member
Joined
Jan 20, 2014
Messages
40
Likes
17
Country
Romania
Dash Cam
2xOpia 2 ex: Vico TF2/TF2+/SF2/Marcus 1/Marcus 3/Marcus 4
#1
v 3.2G

Improvement:
1. Improve Image quality and reduce noise.
2. “1080p 60fps Smart Shutter Mode.” is ON by default.


Under 1080p 60fps (High-Speed Full HD) mode, when encountered
insufficient light (low light condition), Marcus 3 will auto detect and switch
into 1080p 30fps (1080p 30 frames per second) recording.
Recording at day and night time with sufficient incoming light, Marcus 3
provides smooth 1080p 60fps video. If it’s insufficient low light condition,
Marcus 3 will auto switch to 1080p 30fps. The slowest shutter speed
becomes 1/30s during 1080p 30fps, providing brighter image.


Download link:
http://www.vicovation.com/uploads/Marcus3 v3.2G.zip
 

Milamber

Active Member
Joined
Dec 26, 2012
Messages
559
Likes
87
Country
Australia
#4
Thanks suawek, quick question; with the comparison image above what settings were used on each camera including resolution and framer rate?
 
Joined
May 19, 2014
Messages
11
Likes
3
Country
United States
#6
The video quality seems to be about identical with the new firmware, cars straight in front are nice and sharp, but on the sides, license plates are still a bit blurry. I don't see much improvement in daytime driving. The only difference I noticed is that the video seems to be a lot darker now.
 

Similar threads

Top