Vico Marcus 3 Firmware Upgrade

[ics]

v 3.2G

Improvement:
1. Improve Image quality and reduce noise.
2. “1080p 60fps Smart Shutter Mode.” is ON by default.


Under 1080p 60fps (High-Speed Full HD) mode, when encountered
insufficient light (low light condition), Marcus 3 will auto detect and switch
into 1080p 30fps (1080p 30 frames per second) recording.
Recording at day and night time with sufficient incoming light, Marcus 3
provides smooth 1080p 60fps video. If it’s insufficient low light condition,
Marcus 3 will auto switch to 1080p 30fps. The slowest shutter speed
becomes 1/30s during 1080p 30fps, providing brighter image.


Download link:
http://www.vicovation.com/uploads/Marcus3 v3.2G.zip

 

[suawek]

Now is much better. Noise are less then LS430W but pictures are darkness.

 

[suawek]

Camparison side by side DOD LS430W and Marcus 3 with FW 3.2

 

[Milamber]

Thanks suawek, quick question; with the comparison image above what settings were used on each camera including resolution and framer rate?

 

[suawek]

In both cases 1080p 30 fps

 

[frostrambler]

The video quality seems to be about identical with the new firmware, cars straight in front are nice and sharp, but on the sides, license plates are still a bit blurry. I don't see much improvement in daytime driving. The only difference I noticed is that the video seems to be a lot darker now.

 

[suawek]

I made a new comparison with FW 3.2 for M3. Is better, but not better then LS430W. In both cases 1080p 30fps. Original pictures with full sizes are here:
http://www.autowrzuta.pl/viewtopic.php?f=28&t=2766&start=99

 

[isdoo]

Thanks, but your images are broken.