Viofo A119 V3 manually power on/off ?

MooonShine

New Member
Joined
Jan 26, 2020
Messages
1
Reaction score
0
Location
Antalya
Country
Turkey
Can i connect only Battery + and GND without ACC to my A119 V3 dashcam ?

My idea is Dashcam --> Power on/of manual Switch --> Battery +

I want also switch on off manually with a switch, if i connect yellow cable also ACC Cam would power on always and i dont want it.
 
Sure you can add a switch to turn on and off.
I was considering that myself.

Yellow would make it work when car is running...
Now Red would be used if you want to use it in parking mode.
 
Sure you can add a switch to turn on and off.
I was considering that myself.

Yellow would make it work when car is running...
Now Red would be used if you want to use it in parking mode.

I was informed that both red and yellow need to be used to work properly? I ordered the 3-wire hardwire kit but did not wish to use parking mode, so I asked if I could just leave the red hanging. I was told I still need to use the red. I put the red and yellow into one add-a-fuse so it only turns on while the car is on. Unless I'm not understanding the post then I apologize.
 
Yes, both red and yellow need to be connected. Either connect them to the same fuse or each to their own fuse (constant for red and accessory for yellow) and leave parking mode off.
 
Back
Top