maciekelga
New Member
Hi,
I have a problem with my Viofo A119 V3 with firmware 2.0. Cam is connected via hardware kit ACC - correct connection, double checked, cam tested with few high quality SD card.
Hardware kit set to 11.8V, car battery new, voltage is not drop below this value.
I tested with Samsung Evo Plus 64GB, Samsung Pro Endurance Micro SD 64GB, both formatted with SDFormatter.
When camera is connected via hardware kit, after few hours in parking mode it stop recording, button REC is solid red and camera is hanged, there is no any reaction.
Solution is disconnect power cable and reconect, than camera is restarting and start recording again.
Maciek
I have a problem with my Viofo A119 V3 with firmware 2.0. Cam is connected via hardware kit ACC - correct connection, double checked, cam tested with few high quality SD card.
Hardware kit set to 11.8V, car battery new, voltage is not drop below this value.
I tested with Samsung Evo Plus 64GB, Samsung Pro Endurance Micro SD 64GB, both formatted with SDFormatter.
When camera is connected via hardware kit, after few hours in parking mode it stop recording, button REC is solid red and camera is hanged, there is no any reaction.
Solution is disconnect power cable and reconect, than camera is restarting and start recording again.
Maciek