Hi guys,
I don't want to start a new topic, but I did not identified another one related with my issues so I will post here.
Many thanks in advance for your patience.
--------------------------
I purchased in this March an A119s v2 camera with a GPS module included.
From the beginning I noticed that every time last file was corrupted even if the REC led does not stop instantly.
I replaced capacitors with 5F/2.7V, I placed capacitors outside from the camera case, after that almost all last files were saved correctly. But are still some videos which are not properly saved during the trip (drive) even if I applied the foam pad and the camera is properly connected with the GPS stand.
Now, during hot summer days, I noticed that the camera doesn't start when I start the engine. If I put the camera over an air vent deflector and the camera is cooled down is starting Ok.
Also everytime when the camera is starting the date is wrong, 2016/01/01, the settings are preserved, not lost. I blame the RTC battery for that.
-----------------------
I use a Samsung 64GB C10 U3 SD Card
I applied the latest firmware and I reseted to default settings after.
The camera is powered from supplied cigarette USB charger, the 12V connection is from the fuse box (accessories fuse) trough a 12V plug, the whole cable and connectors are hidden beneath the dashboard.
-----------------------
In the end I'm asking myself and I asking you is my camera a defective one?
Because don't matter what I try to fix there are still corrupted files.
Do you let your camera permanently on the windshield during the day and is starting properly?