Wolfbox is Excited to Join the Community! Exclusive 25% Discount for All Members!

Julian23 said:
You would have to cut the connectors at the end of the Wolfbox hardwire kit to make them fit into the 70mai harness.
Click to expand...
I don't think so. They are female wire acceptors so the the three wires of the Wolfbox mated correctly would directly insert in there, right?
 
What do you think? What would you cut, they are Wolfbox wires, right?
 
ujsc said:
What do you think? What would you cut, they are Wolfbox wires, right?
Click to expand...
From the picture I saw you will have to cut off the bullet connectors and the round ring shoe to slide them into the 70mai harness.
Let me check if I have some pictures
 
ujsc said:
What do you think? What would you cut, they are Wolfbox wires, right?
Click to expand...
Found some pics to show it.
Your hardwire kit from WolfBox will have these two types of connectors.
The bullet connector will be there two times for battery and accessorie power.
You will need to cut the wire where the red line is and then strip the wire to have around 10mm of bare copper cable.
20250425_121918.webp


You then need to open the orange connector and slide in the wire. Just close the connector by pressing down on the orange flap and you are done.

20250425_121936.webp
 
Thank you so much. Do you have any suggestions for creating a line directly from the battery with a 20 amp fuse directly to the bcc wire of the battery pack?
 
ujsc said:
Thank you so much. Do you have any suggestions for creating a line directly from the battery with a 20 amp fuse directly to the bcc wire of the battery pack?
Click to expand...
In my battery package were Fuse Tape included in different sizes.
I see no issues with connecting to the battery directly. There are fuses that you can crimp or solder in line with the power cable.
Use a ring cable shoe for the terminal and you will have a nice setup!
 
Can you send me a link to order the ring cable show? Thanks so much!
 
I will need one specifically to connect to right red battery positive terminal without the need for soldering. Thank you.
 
ujsc said:
Can you send me a link to order the ring cable show? Thanks so much!
Click to expand...
I would recommend you to visit your local hardware store to get this stuff.
They can help you to get the correct size.
I don't know how your battery terminal looks like. Just ask them in the store and they will be able to help you.
 
Julian23 said:
I would recommend you to visit your local hardware store to get this stuff.
They can help you to get the correct size.
I don't know how your battery terminal looks like. Just ask them in the store and they will be able to help you.
Click to expand...
I thought most batteries looked and functioned the same. Thanks.
 
ujsc said:
I thought most batteries looked and functioned the same. Thanks.
Click to expand...
There are too many different variations with different cars.
I don't want to recommend you something that doesn't work or fit.
That's why I told you to give your local stores a visit.
 
My installer says he has everything you mentioned. Thanks so much
 
You must log in or register to reply here.
Back
Top