luckylz
Active Member
- Joined
- Apr 8, 2015
- Messages
- 414
- Reaction score
- 107
- Country
- China
follow @funnel 's instruction, I've found the address for 1080p/30fps/35Mbps in firmware 1.1.0.
so the address should be, same as @funnel 's github script:
but the bitrate value, is opposited (maybe the high/low byte rules ?)
full autoexec.ash script:
I will try to figure out how to get the hidden video resolution settings.
Code:
Offset(h) 00 01 02 03 ...
...
004C3930 00 00 0C 42 ...
...
so the address should be, same as @funnel 's github script:
Code:
0xC0100000 + 0x004C3932 = 0xC05C3932
but the bitrate value, is opposited (maybe the high/low byte rules ?)
Code:
0C 42
should be writew as
0x420C
full autoexec.ash script:
Code:
#record 1080p/30fps/35Mbps
writew 0xC05C3932 0x420C
I will try to figure out how to get the hidden video resolution settings.