Zenfox Firmware

richx

Active Member
Joined
Nov 30, 2018
Messages
385
Reaction score
213
Country
Malaysia
Dash Cam
A129 Duo, A139, Mola N3, A119v2, B4K
Has anyone tried updating this firmware posted about 2 months ago? I followed the instructions, seems to have flashed itself but don't see much of any improvement. Let's see if this fixes the "did not start to record after booting up" problem or the "recorded for a bit and randomly stopped without making any beeps" problem.

 
After updating the firmware, the main improvement I found is the camera will provide a constant ~1Hz beep when it decides to stop recording. At least you know recording is offline and can choose to do something about it.
 
  • Like
Reactions: Mtz
My bad. The firmware is exactly the same one I mentioned in September. All they did was remove the change log, hence the page last update was November.

They're definitely reading and noting the moaning happening in here that "merely" disabling the interior view camera when overheating isn't a fix :ROFLMAO:
 
I doubt they will put any more effort to attempt fix any firware issues.
 
Thread starter Similar threads Forum Replies Date
sendoh_dash Zenfox 3
rcg530 Zenfox 12
kamkar Zenfox 7
R Zenfox 80
Nigel Zenfox 4
Back
Top