- Joined
- May 1, 2013
- Messages
- 10,668
- Reaction score
- 6,561
- Location
- Dublin
- Country
- Ireland
- Dash Cam
- Street Guardian UK / EU / EEA Distributor
Many good ( mostly Korean made ) Dash Cameras comes with permanent fix bracket which mounted with double-sided ( 3M ) tape to the car wind-shield.
This poses a problem for those people who want to remove dash camera on daily bases.
I found for myself simple DIY solution of SLIDING Bracket / Mount.
You can quickly and easily slide-in and slide-out your dash camera.
I used household tools / accessories and some "imagination". Below is result.
To finish project from A to Z it will take only about 30-60min.
P.S. - some people might not look into DIY Projects sub-forum, so I have posted this simple brackt / mount solution for Panorama here and combined some other projects into this post. Maybe some will find interesting solution for them.
My previous bracket / mount projects:
Project #1
Project #2
Project #3
Project #4
Project #5
Project #6
Project #7
Project #8
This poses a problem for those people who want to remove dash camera on daily bases.
I found for myself simple DIY solution of SLIDING Bracket / Mount.
You can quickly and easily slide-in and slide-out your dash camera.
I used household tools / accessories and some "imagination". Below is result.
To finish project from A to Z it will take only about 30-60min.
P.S. - some people might not look into DIY Projects sub-forum, so I have posted this simple brackt / mount solution for Panorama here and combined some other projects into this post. Maybe some will find interesting solution for them.
My previous bracket / mount projects:
Project #1
Project #2
Project #3
Project #4
Project #5
Project #6
Project #7
Project #8
Last edited by a moderator: